Motorcycles

A Sliver of Plastic Can Make 21,643 Harleys Say Neutral While in Gear, and 329 of Them Are Police Road Glides

A Sliver of Plastic Can Make 21,643 Harleys Say Neutral While in Gear, and 329 of Them Are Police Road Glides

A thin fin of leftover plastic on a gear position sensor can make a 2026 Harley-Davidson flash a green N while it’s sitting in gear. Think of it as a two-wheeled cousin of the bad transmission signal behind Ford’s F-150 downshift recall. This Harley-Davidson recall covers 21,643 motorcycles, from the base Street Glide to the CVO Road Glide ST, and 329 of them are Police Road Glides. Each one gets a new sensor, made in a new mold, installed free by a dealer.

Harley estimates 0.1% of those bikes have the flawed part. By The Auto Wire’s math, that is about 22 motorcycles. The company is replacing the sensor on every bike in the population anyway, and the neutral signal controls more than the light on the dash.

What Harley filed with NHTSA

Harley-Davidson Motor Company submitted its Part 573 safety recall report on Nov. 3, 2026. NHTSA logged it as campaign 26V730; Harley’s own recall number is 0194. The filing says the engine control module may signal neutral “when the transmission is actually in gear.” Harley describes the risk as unintended forward movement of the motorcycle that could raise the chance of injury, and it says it knows of two injuries potentially related to the condition. The report gives no other detail about those two cases.

The part is a gear position sensor, Harley part number 32700166, made by SSI Technologies, LLC, a Tier 1 supplier in Janesville, Wis. Harley blames a supplier manufacturing issue: plastic molding flash on the sensor that sends an incorrect gear position signal to the engine computer.

The report identifies the bikes by Harley’s model codes. I matched each code to the names in Harley’s 2026 touring and CVO lineup. Counts and build dates are from the filing.

How a false neutral can move a motorcycle

The gear position sensor tells the engine computer which gear the transmission is in, and the green N on the dash is the part the rider sees. That signal also gates the starter. In Harley’s starting instructions for its touring models, the clutch interlock lets the starter run only when the clutch lever is pulled in, the transmission is in neutral, or both. Neutral is one of the two ways past the interlock.

A sensor that reports neutral while first gear is engaged opens that path when it should stay shut. Press the start button without the clutch lever in, and the engine can fire with the bike in gear. The same instructions tell riders to shift to neutral before starting “to prevent accidental movement.” Harley’s recall filing does not walk through the start sequence or say how the two injuries happened, so this is my reading of the mechanism, not the company’s. It is the most direct route from a wrong N to the unintended forward motion Harley describes.

The other route is at a stop. A rider who sees N at a light and lets the clutch lever out expects the bike to sit still. If the transmission is in gear, the clutch engages and a touring bike that Harley lists at 380 kg in running order, about 838 pounds for the 2026 Road Glide, rolls forward.

Harley lists two warning signs for owners and technicians: the gear indicator flickering between neutral and another gear, and the indicator showing neutral while the motorcycle is moving forward.

Molding flash and a new mold

Flash is the thin fin of plastic that forms when molten resin squeezes past the seam where two halves of an injection mold meet. Worn or poorly fitted tooling makes more of it. Factories either trim it off or repair the tool so it stops forming. Harley’s filing says the replacement sensor comes from a new tool that eliminates the flash, so the fix is new tooling at SSI rather than an extra inspection of parts made the old way.

Harley does not explain how the flash corrupts the signal. Its chronology shows investigators inspecting sensors for both flash and damaged spring clips.

194 days from a service bay to a recall decision

On April 16, 2026, Harley’s Technical Subcommittee was told about a gear position sensor with flash found on a 2026 Road Glide (FLTRX) during a service visit. The committee met on April 30. From May 5 to Oct. 1, Harley investigated, using quarantine material requests to inspect sensors, along with parts inspections and monitoring. The matter went to Harley’s Field Action Committee on Oct. 1 and its Executive Decision Authority on Oct. 20, which authorized a voluntary recall on Oct. 27.

On Aug. 3, Harley began screening sensors for flash at its York Vehicle Operations plant, which is why the recalled build windows end between July 25 and Aug. 3. The factory was keeping flawed sensors out of new bikes 85 days before the company decided the bikes already built had a safety defect. Screening the line while an investigation runs is normal and legal. It also means owners of the earlier bikes kept riding on a part the factory had already stopped trusting, without being told.

The filing itself went in on Nov. 3, five working days after the Oct. 27 decision. That is the latest date 49 CFR 573.6 allows, since the rule requires a report within five working days of a defect being determined to be safety-related.

329 Police Road Glides in the population

The police bikes are FLTRXP Police Road Glides built from Oct. 23, 2025, through July 29, 2026. Harley’s Fall 2025 Motor Officer magazine said the 2026 Road Glide will be the exclusive model for Harley-Davidson police motorcycles going forward, and agencies buy it through public contracts. Washington’s state vehicle contract lists the 2026 FLTRXP under police vehicles.

A police motorcycle spends a shift idling at traffic posts, shutting down and restarting, with the officer watching traffic instead of the gear indicator. That gives a flickering sensor more chances to report a wrong neutral than a weekend tourer gets. Fleet managers should run every 2026 police VIN themselves rather than wait for a letter to reach the right desk at a department.

What owners and fleet managers should do

Harley planned to notify dealers between Nov. 6 and Nov. 13 and to mail owner letters between Nov. 16 and Nov. 23, according to its filing. NHTSA’s acknowledgment letter puts the owner mailing at Nov. 16. VINs can be checked at NHTSA’s recall lookup. Harley-Davidson customer service is 1-800-258-2464, and NHTSA’s Vehicle Safety Hotline is 1-888-327-4236.

Harley did not check the “do not drive” or “park outside” advisory boxes on its filing, so this is not an order like the one behind BMW’s park-outside water pump recall. Until the sensor is replaced, pull the clutch lever in every time you press the start button, as Harley’s starting procedure already says to, and don’t take a green N at a stop as proof the transmission is in neutral. If the indicator flickers between N and a gear, tell the service writer it is the symptom listed under recall 26V730. Harley says it will use its general reimbursement plan, so anyone who already paid for a repair tied to this problem should keep the receipt.

Do you trust the green N on your dash, or have you always started with the clutch pulled in no matter what it says?

GGet our stories first
Follow The Auto Wire site on Google News
›

Leave a Reply

Your email address will not be published. Required fields are marked *